Part 1: Preparing server environment#
This part describes the process of preparing the server environment for successful platform installation.
Note
If Ubuntu 20.04 is installed while NVIDIA GPU is plugged in, the latest NVIDIA GPU driver will be installed automatically.
If you plug in the NVIDIA GPU to your system after OS installation you must install the NVIDIA GPU driver manually.
Make sure your server is exclusively used for the Intel® Geti™ platform.
On the server, open a terminal and execute the following steps.
Step 1: Ensure using a sudo account to install the Intel® Geti™ platform#
The user’s account used to install the platform requires administrative privileges and must be included in the sudoers lists. Ensure it is present in /etc/sudoers
.
If not, create the new account:
adduser <username>
or
sudo adduser <username>
add it to group sudo:
usermod -aG sudo <username> or sudo usermod -aG sudo <username>
and then log out and log in again with your newly created account.
Check sudo by clearing the sudo cache:
sudo -k
and by running any command with sudo, e.g.:
sudo ls
This command should simply work.
Ensure that /dev/mem
is accessible by the root user.
You can check it by running the following command and observing if it returns permission errors:
sudo head /dev/mem
Step 2: (Optional) Configure proxy#
Note
Complete this step only if your Intel® Geti™ server will access the internet from behind a proxy.
One way to configure a proxy is to create a file /etc/environment, e.g. with vi:
sudo vi /etc/environment
With all proxies that are applicable in your case. Sample /etc/environment file:
http_proxy=http://USERNAME:PASSWORD@SERVER:PORT/ https_proxy=http://USERNAME:PASSWORD@SERVER:PORT/ no_proxy=localhost,127.0.0.1,<Intel® Geti™ server IP address> HTTP_PROXY=http://USERNAME:PASSWORD@SERVER:PORT/ HTTPS_PROXY=http://USERNAME:PASSWORD@SERVER:PORT/ NO_PROXY=localhost,127.0.0.1,<Intel® Geti™ server IP address>
Confirm proxy settings:
source /etc/environment env | grep -i proxy
Create file /etc/apt/apt.conf and add content:
sudo vi /etc/apt/apt.conf # Press i # Copy and press [right-click] below content and edit as necessary Acquire::http::proxy "http://USERNAME:PASSWORD@SERVER:PORT/"; Acquire::https::proxy "http://USERNAME:PASSWORD@SERVER:PORT/"; # Press [Escape] # Press [SHIFT + ZZ]
Step 3: Create a folder where all Intel® Geti™ data will be stored#
To create a folder, run the following command:
mkdir /<path>/data
Note
<path> is a mounted drive or directory with read/write access permission and adequate storage space for the dataset that you are planning to use, e.g., run df -h.
Note
While using the Intel® Geti™ platform after the installation, if you come close to running out of space (you will receive a notification), use this command to remove some temporary files: rm -rf /data-xfs/ie_storage/imports/*
To give folder required permissions, run the following command:
chmod 750 /<path>/data
Step 4: Install GPU drivers - NVIDIA#
Check NVIDIA GPU driver.
nvidia-smi
If nvidia-smi is not installed on the system, install NVIDIA GPU driver. The recommended version is 525 (nvidia-driver-525).
Run the commands below:
sudo apt install nvidia-dkms-525 sudo apt install nvidia-driver-525
Reboot the system after installing the drivers so that they load into the kernel.
sudo reboot
Set up NVIDIA Container Toolkit with a stable repository and GPG key.
# Check if NVIDIA gpgkey is added to the apt-key repository apt-key list # Look for NVIDIA Corporation entry # If NVIDIA is not listed, run: curl -s -L https://nvidia.github.io/nvidia-docker/gpgkey | sudo apt-key add -
Step 5: Install GPU drivers - Intel#
Check Intel GPU driver.
xpu-smi
If xpu-smi is not installed on the system, install the latest Intel GPU driver as described in the Intel Data Center FPU installation manual.
Reboot the system after installing the drivers so that they load into the kernel.
sudo reboot
Note
Intel, the Intel logo, and other Intel marks are trademarks of Intel Corporation or its subsidiaries. Other names and brands may be claimed as the property of others.